ASME SA182 F9 Steel Socket Weld Flange and A182 F9 Cl2 Blind Flange material manufacturer in India
A182 F9 Alloy Steel Flanges are designed for use in small-diameter, high-pressure pipe systems. It offers high corrosion resistance and ductility because to the minimal proportion of chromium and molybdenum.
Chromium and molybdenum are the two main alloying components in Chrome Moly Alloy A182 F9 Flange. It is beneficial in a wide range of industries and applications. Construction, automobile, energy, and oil and gas are among the industries that can benefit from it.
F9 Alloy Steel Pipe Flanges have high tensile strength, strong corrosion resistance, and increased hardness and toughness qualities. Tensile strength is 380 Mpa, and yield strength is 0.2%Offset 585 Mpa.
Without Chrome Moly Alloy Steel F9 A182 Blind Flanges, repairing or doing continuing maintenance on pipeline would be nearly impossible unless the flow was shut off at an earlier valve, which can damage miles of pipeline.
Lap Joint Alloy Steel A182 F9 Cl2 Slip on flanges are extremely common. It does, however, have a radius at the flange face/bore junction to allow the flanged portion of the lap joint stub end, making it only compatible with lap joint stub ends.
A182 F9 Class 2 Flange is available in sizes ranging from 12″ to 48″ with various dimensions in accordance with ASTM, ASME, and other international standards. Flange pressure capacities are classified into distinct classes.
ASTM A182 F9 Low Alloy Steel Flange is widely used in the manufacture of pipes, aircraft bodies, automobile, railway lines, and offshore and onshore structural engineering.
High Alloy Steel ASTM A182 Gr F9 Flange is an iron alloy with a chromium content of 10.5%. It contains more than 10% alloy.
A182 Gr F9 There are several varieties of threaded flanges, including plain threaded flanges, male threaded flanges, and female threaded flanges. It is threaded in the bore, which corresponds to an external thread on the pipe.
SA 182 Gr F9 Socket Weld Flanges are counter drilled to receive pipe before fillet welding. Because the bore of the pipe and flange are the same, it provides superior flow characteristics.
Slip On Flanges ASME SA 182 Gr F9 are appropriate for low-pressure applications and are simple to install and weld onto various pipes. Furthermore, it aids welding in lowering manufacturing costs. Because it lacks a neck to rest on the pipe, double welding is required.
SA182 F9 Cl1 Forged Flanges are typically welded to pipes or affixed to a threaded end of a shaft before being connected to allow bolt engagement.
ASTM A182 Gr F9 Flanges Standard Specification
|ASTM A182 and ASME SA182
|ANSI/ASME B16.5, BS4504, BS 10, B 16.47 Series A & B, B16.48, EN-1092, DIN, etc.
|ANSI, ASME, BS, DIN, EN Flange, etc.
|1/2 inch to 36 inch
|Class / Pressure Rating
|150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64
|Type of Flange Face
|Flate, Raised Face, Ring Type Joint
Blind Flanges ASTM A182 Gr F9 Chemical Resistance Guide
|Alloy Steel F9
Mechanical Properties of ASME SA182 F9 Steel Socket Weld Flange
|Yield Strength (0.2%Offset)