Titanium Grade 5 Round Bar

Om Export India is a grade 5 titanium bar suppliers. It is being offered in different sizes and shapes to our clients. It is been manufactured by using high quality raw material with latest advance technology.

Titanium Grade 5 Round Bar is an alpha-beta titanium alloy with a high strength to weight ratio and excellent corrosion resistance. It is one of the often used titanium alloys and it is applied in a wide range of applications where excellent corrosion resistance and low density are necessary such as aerospace industries and biochemical applications.

Increased use of ti-6al-4v round bar as biomaterials is occurring due to its superior biocompatibility, lower modulus, and enhanced corrosion resistance when compared to more standard stainless steels and cobalt-based alloys.
titanium grade 5 astm b348 bar is resistant to general corrosion but may be quickly attacked by environments that can cause breakdown of the protective oxide layer including hydrofluoric, hydrochloric, sulfuric and phosphoric acids.
grade 5 titanium hex barhas a very low thermal conductivity at room temperature  6.7 – 7.5 W/m·K which contributes relatively poor machinability. It is vulnerable to cold dwell fatigue. It is alloyed with small amounts of aluminum and vanadium which is typically 6 % and 4 % respectively, by weight.
grade 5 titanium rodis heat treated to vary the amounts of and microstructure of alpha and beta phase in the alloy. The microstructure will differ significantly depending on the exact heat treatment and method of processing. Three common heat treatment processes are mill and duplex annealing, and solution treating and aging.

Standard Specification Of grade 5 titanium bar

Specifications Chart ASTM B348/ ASTM SB348
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Size in mm 5 mm To 500 mm
Diameter in mm 0.1 mm to 100 mm
Length in mm 100 mm To 3000 mm Long & Above
Surface Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

ASTM B348 Grade 5 Rod Chemical Structure

 
Grade Ti C Fe Al V O
Titanium Grade 5 90 min 0.25 max 6 min 4 min 0.02 max

Ti-6al-4v Round Bar Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Leave a Comment

Your email address will not be published. Required fields are marked *

*
*