Aluminum Round Bar
Om Export India is aluminium rod manufacturers in India. It is available in various sizes and specifications to cater to the diverse demands of esteemed customers.
Aluminium Round Bar is physically, chemically and mechanically is similar to steel, brass, copper, zinc, lead or titanium. It can be cast, melted, formed and machined in a same way like this metals. In fact it often the same equipment and fabrication methods are used as for steel.
We are also aluminium solid bar supplier & aluminium flat bar supplier. For providing the best quality of the material we conduct several quality tests on our products such as Mechanical Testing, Positive Material Identification Testing, Micro and Macro Test, Inter-granular Corrosion (IGC) Test, etc.
aluminium square barnaturally produce a protective thin oxide coating which keeps it from making further contact with the environment. It is particularly useful for applications where it is exposed to corroding agents, as in vehicles and kitchen cabinets.
aluminium t bar are less corrosion-resistant than pure aluminum, except for marine magnesium-aluminum alloys. Different types of surface treatment such as anodizing, painting or lacquering can further improve its property. It is perfect for framing, store fixtures, displays, glass/mirror projects and more.
aluminium angle baris used to provide stability to structures. It is frequently installed along with the edges of beams and other platforms that may not have enough capacity to carry the expected load.
astm-b211aluminum bar is a standard specification for aluminum alloy rolled or cold finished bar.
aluminium 6061 baris a precipitation-hardened aluminium alloy which contains magnesium and silicon as its major alloying elements. It has good mechanical properties, exhibits good weldability and it is very commonly extruded.
aluminium 6061 rod has good machinability in harder T 4 and T6 tempers. It can be machined in an annealed temper. It is ductile and has a low melting point and density.
aluminium 6061 flat barhas excellent weldability. The thinner sections can be welded by using gas tungsten arc welding technique. While the heavier sections can be welded using the gas metal arc welding technique.
7075-t6 aluminum round barhas an excellent mechanical properties and exhibits good ductility, high strength, toughness, and good resistance to fatigue.
Standard Specification | ASTM B221 / ASTM SB221 |
Dimensions Chart | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Size Chart | 5 To 500 mm |
Diameter | 0.1 to 100 mm |
Length | 100 To 3000 mm Long & Above |
Surface Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Grade | Si | Fe | Cu | Zn | Mn | Mg | Ti | Cr | Al | Others(Total) |
Aluminium | 0.40 – 0.80 | 0.70 max | 0.15-0.40 | 0.25 max | 0.15 | 0.8-1.2 | 0.15 max | 0.04-0.35 | Balance | 0.15 max |
Temper | Tensile | Hardness | ||||
Ultimate | Yield | Elongation | Brinell | |||
KSI | MPA | KSI | MPA | % | ||
T6, T651 | 45 | 310 | 21 | 145 | 25 | 65 |