Monel 400 round bar

Om Export India, is industries leading Monel 400 round bar supplier. Its main appeal is its excellent alkaline and corrosion resistance properties which make it widely use in marine and chemical processing industries.

What is Alloy 400 hex bar?

Nickel 400 bar is alloy which is made from an alloy of copper and nickel. It is commonly put together in proportion of 67% of nickel and 33% of copper approximately. It has common application which include marine fixture, hardware, shaft, vessel, piping process, heat exchanger, electrical element, water, gas tank, refining equipment and petroleum production.

Alloy 400 round bar exhibits corrosion resistance by many reducing media. It is one of the few alloys round bar which can be used in contact with fluorine, hydrofluoric acid, hydrogen fluoride or their derivatives.

It has exceptional resistance which has been proven in hydrofluoric acid in all concentrations up to the boiling point. It is also resistant to many forms of sulfuric and hydrochloric acid under reducing environments. It has excellent corrosion resistance behavior in seawater.

ASTM B164 UNS N04400 round bar Properties

it displays the following common properties

  • Excellent weldability
  • Good ductility
  • High strength over wide range of temperature
  • Outstanding alkaline and corrosion resistance
  • Solid thermal conductivity

Can UNS N04400 bar be welded?

Monel 400 can be welded, however, it can be bit challenging due to the risk of getting crack. Stick welding will be a good option to weld it but needs cleaning and control of moisture in the coating of electrode.

Welding by TIG or MIG needs gas removing. And welding without removing it could be brittle and liable to cracking.

The best way to avoid this problem is to follow correct procedure.

What is the machinability of Nickel 400 flat bar?

The machinability of Alloy 400 rod is difficult because it get work harden while machining. The standard machining process can be used on iron alloy can be use for this alloy also. It has the machinability rating of 45% and hardness of 70 HRB.

Can Werkstoff Nr. 2.4360 Bar be magnetic?

No, Monel is usually non-magnetic but has magnetic properties under specific condition. Monel 400 and R-405 curie temperatures are close to atmospheric temperature, so both are non-magnetic at high temperature. Moreover, variations in composition even in the material tolerance can cause some lots to be magnetic, although others are not.

Is Monel 400 Square bar rust proof?

It is corrosion resistant by various aggressive factors including speedily flowing seawater.

What welding rod is used for DIN 2.4068 round rod?

Monel Welding Electrode 190 is use for shielded metal arc welding of Monel 400.

Leave a Comment

Your email address will not be published. Required fields are marked *