...

Nickel Alloy Round Bars

Nickel Alloy Round bars is an element formed or alloyed with most metals. It has always been an important metal for a wide variety of industries for the simple reason that it is a highly versatile material that will alloy with most other metals. It is a long, cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts.

nickel bar stock
Nickel Grade: Nickel 200, Nickel 201
Nickel Standard: ASTM B160/ ASME SB160
Nickel Alloy Square Bar: 4mm x 4mm~100mm x 100mm
Nickel Alloy Flat bar: Thickness 2mm~100mm, Width 10mm~500mm
Nickel Alloy Rectangles Size: 33mm x 30mm to 295mm x 1066mm
Length: Random
Finish: Bright, Polished, Grinding etc.
Quantity: 1-100 tons

nickel flat bar has high versatility, combined with its outstanding heat and corrosion resistance has led to its use in a diverse range of applicationssuch as aviation, aerospace, electron, petroleum, resistance,components of high temperature equipment, machine manufacturing and so on.

polished nickel flat bar is a long and rectangular-shaped nickel bars. Ithas nickel plating on brass that is then polished. It may be lacquer coated but typically is not because nickel does not tarnish.

nickel square bar is not magnetic due to its high nickel and chromium composition. It is most resistant to corrosion compared to all the stainless steel groups. It has excellent mechanical properties.
pure nickel rod

pure nickel round bar is resistant to corrosion in water or air, and therefore is used as a protective coating. It is a reliable conductor of electricity; it’s used for wires in electronics, in batteries and electrodes.

Nickel Flat Bar Standard Specifications

Dimensions DIN, EN, ASTM, JIS, ASME, BS, AISI
Round Bars size Diameter: 3-~800mm
Flat Bars size Thickness: 2 -100mm
Width: 10 to 500mm
Angle Bars size 3mm*20mm*20mm~12mm*100mm*100mm
Channel Bars 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness
Rectangular Bars Section 3.0 to 12.0mm thickness
Billet Size 1/2 to 495mm Diameter
Rectangles Size 33 x 30mm to 295 x 1066mm
Hollow Bars 32mm OD x 16mm ID to 250mm OD x 200mm ID)
Dimensions Diameter / Height:
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Finish Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black
Surface Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished
Condition Hardened & tempered, annealed
Technique Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bars,Cold Rolled, Rod
Processing Bars cutting to 650mm
Form Rod, Round, Channel Bars, T-Bars, Flat Bars, Precision Ground Bars, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bars, Ingot, Billet, I/H Bars, Forging etc.

Chemical Composition Nickel Square Bar

Grade Ni Fe C Mn Si Cu Mg Ti S
Nickel 201 99.0 Min 0.4 Max 0.02 Max 0.35 Max 0.2 Max 0.25 Max 0.15 Max 0.1 Max 0.01 Max
Nickel 200 99.0 Min 0.4 Max 0.15 Max 0.35 Max 0.1 Max 0.25 Max - - 0.01 Max

Pure Nickel Bar Stock Mechanical Characteristics

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
8.9 G/Cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %

Leave a Comment

Your email address will not be published. Required fields are marked *

*
*

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.