Titanium Gr 5 Sheets & Plates

We maintain the supreme quality of Titanium Gr 5 Sheets & Plates at Om Export India. This is amongst the most common and often used titanium grade. This product range has incredible strength with the added compounds of aluminium. They are light weighted and anti-corrosive nature. Hence, these Steel have been exceedingly demanding applications.

It has the perfect firmness and thermal as well as electrical conductivity properties. This product is also good to go with heat treatment works. They show off splendid properties of accessibility, weldability, malleability, and flexibility. They have a modest range of yield as well as tensile strengths. Also, the elongation range goes up to the 15 % maximum.

ASTM B265 Titanium Grade 5 Coils Supplier, ASTM B265 Titanium Gr 5 Sheets Exporter, Gr 5 Titanium Chequered Plates Stockists, Titanium Gr 5 Perforated Sheets, Titanium Gr 5 CR Sheets, Titanium Gr 5 #4 Finish Plates, Titanium Gr 5 Shim Sheets, Titanium Alloy Gr 5 Hot Rolled Plates, Titanium ASTM B265 Gr 5 Plates, Titanium Grade 5 Sheets and Plates Manufacturer in India.

Grade 5 sheets of steel are available in variant tempers to work with cold-rolled as well. This product is rich in a very rare chemical component named as vanadium. Hence, it has such excellent hardening and stress proofing attributes. Besides this, they are also comprised of the components like titanium, aluminium, hydrogen, nitrogen, carbon, and iron. This chemical make-up has nice temperature tolerance. The melting point commonly reaches to 1660 degrees Celsius (or 3020 degrees Fahrenheit). In addition to this, they also have great numbers of thermal expansion and modulus of elasticity.

Titanium Alloy Gr 5 #8 Mirror Finish Plates, Titanium Gr 5 2B Finish Plates, Titanium DIN 3.7165 Sheets Dealer, Gr 5 Titanium Alloy Chequered Plates Stockists, UNS R56400 Strips, ASTM B265 Titanium® Alloy Gr 5 Cold Rolled Sheets, DIN 3.7165 Plates, Titanium Gr 5 Hot Rolled Plates, Titanium UNS R56400 Shim Sheets, ASME SB265 Titanium Grade 5 Sheets and Plates Supplier in India.

Because of its cost-effectiveness and quick supply, they are widely applied in the manufacturing of bicycle body parts and bolts. Also, they have been significantly favored in the aircraft industries for their high-temperature general structural applications. Besides this, their pure and rich chemical structure let them enter into the biomedical implanting purposes.

The prevailing theory for the specification and properties of Titanium Gr 5 Sheets & Plates is mentioned in the ASTM B265 and ASME SB265 standards. They can be availed in variant hardness ranges like soft, hard, half-hard, quarter- hard, spring-hard, etc.

Also, grade 5 comes in different finish works like hot-rolled, cold-rolled, 2B, 2D, BA, SATIN (with plastic coating), etc. it is dependent on the specifications given by the clients.

Titanium Gr 5 Sheets & Plates needed to pass some of the tests for authenticity and quality assurance. Some of them are PMI, third party inspection, positive material tests, chemical and mechanical analysis, IGC tests, etc.


Titanium GR 5 R56400 3.7165

Specification of Titanium Gr 5 Sheets and Plates

Titanium Sheets and Plates Specification : ASTM B265 / ASME SB265
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.


Al Fe O Ti V
6 0.25 0.2 90 4


Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Titanium Gr. 5 4.43 g/cm3 1632 °C (2970 °F) Psi – 138000 , MPa – 950 Psi – 128000 , MPa – 880 14 %

Titanium Gr 5 Sheets and Plates Application Industries

Our Titanium Gr 5 Sheets and Plates are used in a wide range of applications and various industries. Below are a few of them:

  • Petrochemical Industry

  • Oil and Gas Industry

  • Chemical Industry

  • Power Plant Industry

  • Energy Industry

  • Pharmaceuticals Industry

  • Pulp & Paper Indusry

  • Food Processing Industry

  • Aerospace Industry

  • Refining Industry

Latest Price List of Titanium Gr 5 Sheets and Plates

Om Export India is one of the leading manufacturer and supplier of Titanium Gr 5 ASTM B265 Sheets and Plates, Titanium Grade 5 ASME SB265 Coils, Titanium Alloy Gr 5 Foils, Gr 5 Titanium Strips, ASTM B265 Titanium Gr 5 Perforated Sheets, ASME SB265 Titanium Gr 5 Sheets, Plates, Coils at the best price in India.

Leave a Comment

Your email address will not be published. Required fields are marked *