...

Titanium Grade 2 Round Bar

Om Export India, is a renowned grade 2 titanium bar suppliers. Our technical team offers a best quality material which is been manufactured by using latest technology. It is been recognized across the world due to its high material strength and low weight.
Titanium Grade 2 Round Baris a pure alpha titanium round bar. With moderate strength and excellent corrosion resistance and formability, represents the most widely used form of titanium.

grade 2 titanium hex bar is typically available in the annealed condition and is readily heat treatable to increase strength, for a wide range of applications. For most applications it is typically alloyed with 6% of aluminum and 4% of vanadium, respectively, by weight.
grade 2 titanium bar stock are available in sizes of 300mm dia X 500mm length, 300mm dia X 1000mm length, 300mm dia X 2000mm length, 300mm dia X 3000mm length.
Compared to the other grades of titanium rod, grade 2 titanium rod is slightly weaker than Grade 3, but stronger than Grade 1 and equally resistant to corrosion. It is non-magnetic in nature. These properties are versatile in regard to its applications.
titanium grade 2 astm b348 bar is also used to manufacture heat exchangers and cryogenic vessels. In seawater, it is fully resistant to corrosion at temperatures up to 300°C. It is highly resistant to chemical environments including oxidizing media, organic acids, alkaline media, and compounds, aqueous salt solutions and hot gases. Its corrosion resistance holds up in liquid metals, nitric acid, bromine gas, mildly reducing acids and wet chlorine.

ASTM B348 grade 2 Rod Specification

Check online ASTM B348 grade 2 Flat Bar stock, buy cut to size at best price

Specifications Chart ASTM B348/ ASTM SB348
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Size in mm 5 mm To 500 mm
Diameter in mm 0.1 mm to 100 mm
Length in mm 100 mm To 3000 mm Long & Above
Surface Finish Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish
Tolerance H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements
Form Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.

Chemical Properties of Grade 2 Titanium rod

Grade C N O H Ti Fe
Titanium Gr 2 0.10 max 0.03 max 0.25 max 0.015 max bal 0.30 max

Titanium grade 2 ASTM B348 bar Mechanical Properties

Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
4.5 g/cm3 1665 °C (3030 °F) Psi – 49900 , MPa – 344 Psi – 39900 , MPa – 275 20%

Leave a Comment

Your email address will not be published. Required fields are marked *

*
*

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.