![](https://omexportindia.com/wp-content/uploads/2023/12/Copper-Round-Bar-500x420.jpg)
Copper Round Bar
Om Export India, is recognised in the metal as a copper round bar suppliers & copper rod manufacturer.We perform the entire production process in strict consent with the industry standards and norms. The product is been tested with the guidance of our skilled quality team.
copper hex bar is a soft, malleable and ductile which has very high thermal and electrical conductivity. It is one of the most adaptable engineering materials. The combination of physical properties such as conductivity, strength, corrosion resistance, machinability and ductility makes it suitable for a wide range of applications. Its properties can be further enhanced with variations in composition and manufacturing methods.
copper flat bar is a tough, ductile and malleable materialand these properties make it extremely suitable for tube forming, wire drawing, spinning and deep drawing. It is a long and rectangular-shaped metal bars which are used in a wide range of structural and architectural applications.
copper square bar The melting point for pure Copper is 1083ºC. It has traditionally been the standard material which is used for electricity transmission applications. It is widely used in many industries for general assembly or manufacturing.
ofhc copper rod resist corrosion by fresh water and steam. It is also resistant to corrosion in marine and industrial atmosphere copper alloys.
alloy 110 copper rod is resistant to saline solutions, soils, non-oxidising minerals, organic acids and caustic solutions. It can be hot and cold worked. Its ductility can be restored by annealing and it can be done either by specific annealing process or by incidental annealing through brazing or welding procedures.
c10100 copper bar is Oxygen-Free Electronic Copper which is also known as OFE, i.e., it contains 99.99% pure copper with 0.0005% oxygen content. It has high ductility and electrical and thermal conductivity and low volatility under high vacuum.
Specifications | ASTM B151, ASME SB151 |
Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
Range | 5 To 500 mm thick in 100 TO 6000 mm |
Cu-Ni Round Bars | 6 to 120 mm. |
Cu-Ni Square Bars | 10 to 200 mm. |
Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
Length | 100 to 3660 mm Long |
Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
UNS No. | Copper + Silver | Nickel + Cobalt | Manganese | Lead | Iron | Zinc | Phosphorus | Sulfur | Carbon |
C71500 | remainder | 29.0-33.0 | 1.0 max | 0.05a max | 0.40-1.0 | 1.0a | |||
C71520 | 65.0 min | 29.0-33.0 | 1.0 max | 0.02 | 0.40-1.0 | 0.5 | 0.02 max | 0.02 max | 0.05 max |
Element | Copper Nickel 90/10 | Copper Nickel 70/30 |
Density | 8.1 g/cm3 | 0.323 lb/in3 at 68 F |
Melting Point | 1443 °C (2430 °F) | 2260 F |
Tensile Strength | Psi -80,000, MPa -551 | 50000 psi |
Yield Strength (0.2%Offset) | Psi - 35,000, MPa - 241 | 20000 psi |
Elongation | 30 % | 30 % |