...

ASTM A182 F310

Forged low alloy and stainless steel pipe components intended for use in pressure systems are covered by the A182 F310 standard. This medium carbon austenitic stainless steel is intended for use in high temperature applications, such as heat treatment equipment and furnace parts. It operates continuously at temperatures as high as 1150°C and intermittently at 1035°C.

SA 182 F310 is extremely resistant to oxidation and corrosion since it contains 20% nickel and 25% chromium. Because of its high chromium and medium nickel concentration, it can be used to lower sulphur levels in atmospheres that contain hydrogen sulphide. It is often utilised in petrochemical settings and other settings with somewhat carburising atmospheres. Applications for ASTM A182 F310 include annealing covers, saggers, refractory anchor bolts, annealing covers, annealing chambers, food processing equipment, kilns, radiant tubes, lead pots, tube hangers for steam boilers and petroleum refining, internal coal gasifier components, thermowells, burners, and combustion chambers, and cryogenic structures. A forged or cast steel ring known as a stainless steel 310 flange is used to mechanically attach pipe segments or link pipe to a pump, pressure vessel, valve, or other instrument. By matching electrodes and filler metals, it can be welded.

Preheat and post heat are not necessary for Alloy 310 flanges, but complete post-weld solution annealing is necessary for corrosion service in liquids. In air up to 1035°C when used intermittently, and 1050°C when used continuously, it exhibits good oxidation resistance. It resists carburization, oxidation, and sulfuration.

 

A182 F310 Flanges specification

Looking for custom sizes in 310 Stainless Steel Flanges? Manufacturer of A182 F310 Weld Neck and socket weld flanges as per customer drawing in all pressure ratings

Size range 1/2" (15 NB) - 48 Inch (1200NB) DN10~DN5000
ASTM/ ASME Specification ASTM A182 F310 / ASME SA182 F310
Other Standards ANSI/ ASME B16.5, B16.48, B16.47 Series A & B, BS4504, BS 10, EN-1092 -1/2, DIN, ANSI, ASME, BS, DIN, EN, GOST.
Pressure class Class 150, 300 #, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
Manufacturer of Plate/ Forged / Threaded / Screwed
Other supporting material Ring Joint, Gasket, SS Flanges Bolts
Most common types of ASTM A182 Gr F310 Flanges Weld Neck Ring Flange (WNRF), A182 Gr F310
Slip-On Ring Flanges (SORF), Stainless Steel 310
Blind Ring Flanges (BLRF), ASTM A182 Type 310
Socket Weld Ring Flanges (SWRF), F310H
Threaded Ring Flange, 310 SS
Lap Joint Ring Flanges (LJRF), 310 Stainless Steel
Ring Type Joint Flanges (RTJF), ASTM A182 F310
Face Type Raised Face (RF), Flat Face (FF), Large Male-Female (LMF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Small Tongue, Large Tongue & Groove, Small Male-Female (SMF), and Groove
Material Origin India/ Korea / West Europe / Japan / USA
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report for all flanges
Third Party Inspection Report, etc
Material Test Certificates (MTC) as per EN 10204 3.1 and 10204 3.2, NACE MR0103, NACE MR0175

SA 182 F310 equivalent

Manufacturer and supplier of ASTM A182 Gr F310 Lap Joint Flanges in UNS S31000/ DIN 1.4841 specifications

Stainless Steel SS 310
AISI 310
UNS S31000
Werkstoff Nr. 1.4841

Stainless Steel 310 Flanges Chemical Composition

Ni 19 – 22
Cr 24 – 26
C 0.25 max
Fe Balance
Mn 2 max
Si 1.50 max
S 0.03 max
P 0.045 max

Alloy 310 Flanges Physical & Mechanical Properties

Density 8.0 g/cm3
Melting Point 1454 °C (2650 °F)
Tensile Strength Psi – 75000 , MPa – 515
Yield Strength (0.2%Offset) Psi – 30000 , MPa – 205
Elongation 35 %

Types of 310 Stainless Steel Flanges

  • ASTM A182 F310 Blind Flanges
  • ASTM A182 F310 Spectacle Blinds
  • ASTM A182 F310 High Hub Blinds
  • ASTM A182 F310 Orifice Flanges
  • ASTM A182 F310 Slip-on Flanges
  • ASTM A182 F310 Socket Weld Flanges
  • ASTM A182 F310 Weld Neck Flanges
  • ASTM A182 F310 Flat Flanges
  • ASTM A182 F310 Loose Flanges
  • ASTM A182 F310 Threaded Flanges
  • ASTM A182 F310 Lap Joint Flanges
  • ASTM A182 F310 Reducing Threaded
  • ASTM A182 F310 Weld Neck Flanges Series A or B
  • ASTM A182 F310 Square Flanges
  • ASTM A182 F310 Groove & Tongue Flanges

Leave a Comment

Your email address will not be published. Required fields are marked *

*
*

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.