![](https://omexportindia.com/wp-content/uploads/2023/12/Nickel-Alloy-Round-Bars-750x420.webp)
Nickel Alloy Round Bars
Nickel Alloy Round bars is an element formed or alloyed with most metals. It has always been an important metal for a wide variety of industries for the simple reason that it is a highly versatile material that will alloy with most other metals. It is a long, cylindrical metal bar stock that has many industrial and commercial applications. The most common application is shafts.
nickel bar stock
Nickel Grade: Nickel 200, Nickel 201
Nickel Standard: ASTM B160/ ASME SB160
Nickel Alloy Square Bar: 4mm x 4mm~100mm x 100mm
Nickel Alloy Flat bar: Thickness 2mm~100mm, Width 10mm~500mm
Nickel Alloy Rectangles Size: 33mm x 30mm to 295mm x 1066mm
Length: Random
Finish: Bright, Polished, Grinding etc.
Quantity: 1-100 tons
nickel flat bar has high versatility, combined with its outstanding heat and corrosion resistance has led to its use in a diverse range of applicationssuch as aviation, aerospace, electron, petroleum, resistance,components of high temperature equipment, machine manufacturing and so on.
polished nickel flat bar is a long and rectangular-shaped nickel bars. Ithas nickel plating on brass that is then polished. It may be lacquer coated but typically is not because nickel does not tarnish.
nickel square bar is not magnetic due to its high nickel and chromium composition. It is most resistant to corrosion compared to all the stainless steel groups. It has excellent mechanical properties.
pure nickel rod
pure nickel round bar is resistant to corrosion in water or air, and therefore is used as a protective coating. It is a reliable conductor of electricity; it’s used for wires in electronics, in batteries and electrodes.
Dimensions | DIN, EN, ASTM, JIS, ASME, BS, AISI |
Round Bars size | Diameter: 3-~800mm |
Flat Bars size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
Angle Bars size | 3mm*20mm*20mm~12mm*100mm*100mm |
Channel Bars | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Rectangular Bars Section | 3.0 to 12.0mm thickness |
Billet Size | 1/2 to 495mm Diameter |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Hollow Bars | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Dimensions | Diameter / Height: |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline,Polished |
Condition | Hardened & tempered, annealed |
Technique | Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bars,Cold Rolled, Rod |
Processing | Bars cutting to 650mm |
Form | Rod, Round, Channel Bars, T-Bars, Flat Bars, Precision Ground Bars, Blocks, Square, Rings, Round Rod, Triangle, Hollow, Rectangle, Threaded, Hex (A/F), Profiles, Half Round Bars, Ingot, Billet, I/H Bars, Forging etc. |
Grade | Ni | Fe | C | Mn | Si | Cu | Mg | Ti | S |
Nickel 201 | 99.0 Min | 0.4 Max | 0.02 Max | 0.35 Max | 0.2 Max | 0.25 Max | 0.15 Max | 0.1 Max | 0.01 Max |
Nickel 200 | 99.0 Min | 0.4 Max | 0.15 Max | 0.35 Max | 0.1 Max | 0.25 Max | - | - | 0.01 Max |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.9 G/Cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |