Duplex 2205 Round Bar

We Om Export India are duplex round bar suppliers, which is being made under the guidance of our accomplished quality team by using improved techniques and latest technology.Duplex steel round baris available with us in various sizes, grades and specification.

Duplex 2205 round bar contain chromium of 22%, molybdenum of 3%, nickel of 5-6%, with high general, localized, and stress corrosion resistance properties in addition to excellent impact toughness and high strength.

2205 duplex stainless steel round bar provides pitting and crevice corrosion resistance which in almost all corrosive media it is superior to austenitic stainless steels 316L and 317L.

duplex 1.4462 roundbar also has low thermal expansion and high thermal conductivity as well as high corrosion and erosion fatigue properties than austenitic.

duplex hex bar should be annealed at 1900°F minimum, followed by rapid cooling, ideally by water quenching. And this treatment is valid for both solution annealing and stress relieving. Stress relief treatments at any lower temperature take the risk of detrimental intermetallic or precipitation of nonmetallic phases.

2205 duplex flat bar yield strength is about twice that of austenitic stainless steels and it allows a fabricator to save weight and makes it more cost competitive as compared to stainless steel 316L or 

duplex square bar can be machined with high-speed steel tooling at the same feeds and speeds as stainless steel 316L. It possesses good weldability. The motive of welding duplex steel is that the weld metal and heat-affected zone retains the corrosion resistance, toughness and strength of the base metal. It is not difficult to weld it, but it is necessary to design welding procedures sot that it lead to a favorable phase balance after welding and will avoid precipitation of detrimental intermetallic or nonmetallic phases.

Duplex 2205 UNS S32205 / S31803 Round Bar Specification

Cold & Hot Rolled Duplex 1.4462 Flat/ Threaded/ Hollow/ Black Bar manufactured as per ASTM A276/ A479

Standard Duplex 2205
UNS S31803 / S32205
Werkstoff Nr. 1.4462
Grade ASTM A276 UNS S31803 / ASTM A276 UNS S32205
Standard Specification ASTM A276, ASME SA276 / ASTM A479 ASME SA479
Dimensions EN, DIN, JIS, ASTM, BS, ASME, AISI
Finish Peel turned and burnished (PTB)
Peel turned (PT)
Rough machined (RM)
Hot Rolled Pickled
Sand Blasting Finished
Cold Drawn
Bright Polished
Polished
Hairline
Black
Rough Turned
NO.4 Finish
Matt Finish
BA Finish
Length 1 to 6 Meters, Custom Cut Lengths
Manufacturing Shapes Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.
EN 10088-3 20-450 mm
EN 10272 20-160 mm
AD2000- W2/W10 -
ASTM A 479 20-450 mm
ASME SA 479 20-450 mm
NACE MR 0175 custom

ASTM A276 Duplex Alloy 2205 Bar Chemical Composition

Contact us for small piece or bulk Duplex Round Bar, available in bright and mill finish, All Sizes and Thickness at factory price ex Mumbai

Duplex 2205 C Mn Cr Fe N Si P S Mo Ni
ASTM A276 S31803 0.030 max 2.00 max 22.0 – 23.0 63.72 min 0.14 – 0.20 1.00 max 0.030 max 0.020 max 3.0 – 3.5 4.50 – 6.50
ASTM A276 S32205 0.030 max 2.00 max 21.0 – 23.0 63.54 min 0.8 – 0.20 1.00 max 0.030 max 0.020 max 2.5 – 3.5 4.50 – 6.50

ASME SA 276 Type S31803 Mechanical Properties

 
Density 7.8 g/cm3
Tensile Strength (PSI/MPa) Psi - 90000 , MPa - 620
Yield Strength (PSI/MPa) (0.2%Offset) Psi - 65000 , MPa - 450
Melting Range 1440 °C (2625 °F)
Elongation % 30 %

Leave a Comment

Your email address will not be published. Required fields are marked *

*
*