Fri - Wed: 09:30 AM To 06:30 PM Thu Is Weekly Off
sales@omexport.co.in
Fri - Wed: 09:30 AM To 06:30 PM Thu Is Weekly Offsales@omexport.co.in
Sheet : Steel sheet metal can be defined as metal thicker than foil but thinner than plate thickness. The gauge or thickness determines the designation of when metal foil becomes metal sheet and when metal sheet becomes metal plate.
Plate : Steel Plate is commonly used to strengthen foundations and uphold mass units of weight like bridges. Alternatively, it provides a base for construction of larger materials and non-workable parts. Applications for Steel Plate are based acutely on the specifics of the project.
Coil : Steel coil is made from a finished steel product such as sheet or strip that has been wound or coiled after rolling; its width is much greater than the thickness. Depending on the production method, steel coil can be classified as Hot Rolled, Cold Rolled, or Galvanized.
Thickness |
0.4mm to 200 mm |
|---|---|
Sizes |
1000mm x 2000mm / 1220mm x 2440mm/ 1250mm x 2500mm/ 1500mm x 3000mm to 6000mm / 2000mm x 4000mm to 6000mmm |
Hardness |
Soft, Hard, Half hard, Quarter hard, Spring Hard etc. |
Forms |
Coils, Foils, Plain Sheets, Perforated Sheets, Chequered Plates, Strips, Flats, Blanks, Circles, Rings etc. |
Finish |
Hot rolled Plates (HR), Cold Rolled Plates (CR), 2B, 2D, BA, NO.4, NO.8, MAT PVC. |
Standards |
ASTM A240/ ASME SA240 ,ASTM A516, ASME 162 |
Range |
0.4MM to 150MM Thickness in Sheets, Plates & Coils. |
Type |
Coil, Foil, Roll, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flat, Blank (Circle), Ring (Flange) |
ITEMS |
MATERIAL |
SPECIFICATIONS |
GRADES |
|---|---|---|---|
|
Stainless steel |
ASTM / ASME A/SA 240 |
304, 304L, 304H, 309S, 309H, |
|
|
PLATES, SHEETS & COILS |
310S, 310H, 316, 316H, 316L, |
||
|
0.1MM to 120 MM THK |
316 TI, 317, 317L, 321, 321H, |
||
|
347, 347 H, 409, 410, 410S, 430 |
|||
|
Carbon steel |
ASTM / ASME SA 240 |
S 31803 , S 32205 , S 32550 , S 32750 , S 32760 |
|
|
Duplex & Super Duplex Steel |
ASTM / ASME A/SA 516 / |
60 / 70, & B |
|
|
517 / IS 2062, IS 2002 |
|||
|
Alloy steel |
ASTM / ASME A/SA 387 |
F 5, F 9, F 11, F 12, F 22, F 91 |
|
|
Abrasion Resistant Steel Plates |
Hardox, Abrex / semi-hard plates, Swebor,Quard, Raex |
HARDOX® 400 AND HARDOX 500 BRINEL, Abrex 400, &Abrex500 series,Sumihard400, Sumihard 450, Sumihard 500,Swebor 400 Swebor 450 &Swebor500,Quard 400, RAEX 400, |
|
|
HIGH NICKEL ALLOYS |
ASTM / ASME SB 162, |
UNS 2200 ( NICKEL 200 ) / UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600 ) / UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 ), UNS 8020 ( ALLOY 20 / 20 CB 3 ) |
|
|
ALUMINUM ALLOYS |
ASTM-B-209M, EN573, EN485 |
AA1050, 1070, 1100, 1200, 3003, 3103, 3105 , 8011,6061, 6063, |
|
|
TITANIUM & TITANIUM ALLOYS |
R50250, R50400, R50550, R50700, R56400, R54520 |
Grade 1, Grade 2, Grade 3 |
|
|
TANTALUM |
ASTM B 708 |
99.95min or 99.99min, 2.5% W |
|
|
ZIRCONIUM |
ASTM B352 / B352M |
||